JL Audio 10W3v3 Sealed Wedge Enclosure, Dual 10″

JL Audio 10W3v3 dual sealed wedge enclosure, 10-inch, with 0.625 cubic feet of net airspace at a system Qtc of 0.82.

At Qtc 0.82 the response rises slightly before it rolls off. In a trunk or cab that reads as weight on kick drums rather than boom.

Wedge enclosures follow the seat-back angle and fire rearward into the trunk, which acts as an acoustic extension of the box.

Construction: 3/4-inch MDF with a double-layer 1.5-inch front baffle, the outer layer recessed so the driver sits flush, V-groove and dado joinery at the panel seams. Carpeted in black, polyfill pre-installed and terminal cup fitted.

Check your driver's mounting depth against the 7.39-inch figure in the specifications. The drivers share one chamber, so run matching drivers wired to the same impedance. If you are between two drivers, send both model numbers and we will tell you which one this volume suits.

Questions on fit or matching? Call or text (775) 541-2950 with your vehicle and the gear you are running.

Specifications

• Enclosure type: Sealed
• Drivers: Dual, 10-inch
• Net volume: 0.625 cu ft
• System Qtc: 0.82
• Max driver mounting depth: 7.39 in
• Height: 15 in
• Width: 27.5 in
• Front baffle: Double layer, 1.5 in
• Chambers: Shared
• Fits: JL Audio 10W3v3