Ford Bronco Dual 12″ Down-Firing Sealed Subwoofer Enclosure

Ford Bronco sealed down fire subwoofer enclosure, dual 12-inch, sized to the airspace the driver's published parameters call for rather than the space that happens to be free.

Sealed is the forgiving alignment: a smaller box, a gentle rolloff, and tolerance for a volume that lands slightly off the target. It gives up some output per watt to a ported box in exchange for control.

Firing into the floor, the sealed rolloff meets rising cabin gain below about 60 Hz, so in-car extension runs below the anechoic figure above.

Shaped for the Ford Bronco, so it uses the cavity without starving the driver of volume. The baffle faces the floor, which keeps cargo off the cone and leaves a flat top you can load on.

Construction: 3/4-inch MDF, V-groove and dado joinery at the panel seams. Carpeted in black, polyfill pre-installed and pre-wired terminal cup fitted.

Check your driver's mounting depth against the 8-inch figure in the specifications. Not sure the driver matches? Send us the model number and we will check it against the spec sheet before you order.

Questions on fit or matching? Call or text (775) 541-2950 with your vehicle and the gear you are running.

Specifications

• Enclosure type: Sealed
• Drivers: Dual, 12-inch
• Max driver mounting depth: 8 in
• Front baffle: 3/4 in MDF
• Vehicle: Ford Bronco